Our lamination option is a thin transparent layer that we apply to the labels after they are printed to help protect the print from any abrasion, detergents, or chemicals the label comes in contact with. This added layer of protection will ensure your labels will stay looking vibrant for years to come.

The lamination option is included on our Camp Pack, School Pack and other selected packs (check the product descriptions for more information).

Label Daddy labels will stick to any hard surfaces and some soft surfaces like: leather on a baseball glove, a dog leash or a diaper bag. Our stick on clothing labels can be applied to garment/care tags, as well as any hard surface like our other labels!

WARNING: Do not apply labels directly to skin, hair, fur, or any other part of a person or animal. The adhesive is strong and can cause injury.

All Label Daddy Labels are dishwasher, laundry, and microwave safe, unless specifically noted on the product page. However, we highly recommend our lamination option for labels that will be exposed to a lot of abrasion, repeated washing, strong detergents, sunscreens, and other chemicals

Label Daddy labels should always be applied by an adult or under adult supervision. To make sure that your labels will work as expected, it's important that you order the correct size label for your application. Every label page on our website gives you details about the specific label and what you can use that label on. For best results, our clothing labels should be applied to a garment’s care tag. If no care tag is present, apply the label to a garment’s brand imprint (the stamped area where a company will provide their logo or care information). We do not recommend applying the labels directly to fabric, as it may not have a strong enough surface for the adhesive to bond to.

Our labels like pressure, so don't be afraid to really give them a good going over with your thumb, or a good squeeze between your thumb and fingers. Another trick to help your labels stick - after applying labels to clothing items, throw them in the dryer for a few minutes, and then go over the labels one more time while they are still warm. Make sure to give them 24 hours before putting them in the washing machine.

For hard goods, just stick them to a clean, dry surface and work any bubbles you find, out to the edges with your thumb.

Have a camp, school or other organization and need a large quantity of labels? For larger orders, we can create a label for you using a custom logo or design. Our customer service team would love to help you with your vision. Contact us here.

Curious about how to apply our vinyl wall decals? Here is a quick rundown.

1. Wipe down the wall (make sure it if fully dry).

2. Slowly Peel the backing off of the decal, leaving the transfer tape on the front.

3. Place decals in desired position on the wall.

4. Starting from the center of the decal, slowly press/scrape in an outward motion using the included applicator tool. Be sure to push all air bubbles out towards the outer edges.

5. Slowly peel back a small section of the transfer tape to ensure decal stuck. If the decal is lifting, simply press it down with your fingers. Be sure to pull the transfer tape off slowly and pull the tape towards you. Keep it as flat as possible.